Stihl FS 461 C-EM Petrol Clearing Saw (45.6cc)
£884.34 (inc VAT)
Usually dispatches within 7 to 10 working days.
Related products
£5.29 – £127.00 (inc VAT)
In stock
For dispatch Next Working Day.£33.00 (inc VAT)
In stock
For dispatch Next Working Day.£5.50 (inc VAT)
In stock
For dispatch Next Working Day.
The Stihl FS 461 C-EM brushcutter is perfect for working in challenging areas of tough grass. The FS 461 C-EM has a 4-point anti-vibration system, ErgoStart, multi-function handle, bike handle, tool-free handle adjustment, 2-MIX M-Tronic engine. Comes complete with an Advance Universal harness and AutoCut 46-2 mowing head.
STIHL M-Tronic
This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed – even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.
STIHL ErgoStart
STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one-third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
Reduced-emission engine technology
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
Multi-function control handle
Easy, comfortable thumb-operated control means the operator’s hand never leaves the handle.
Bike handle
When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.
STIHL 4-point anti-vibration system
In STIHL brushcutters, steel springs act as anti-vibration elements to reduce the transmission of vibrations caused by the motor and rotary cutter. The handles, therefore, have extremely low vibration and the device is easy to guide. (similar to illustration)
Tool free handle adjustment
The central wing nut enables easy adjustment without the use of tools. For transportation and space-saving storage, the handle can be rotated by 90°.
Compensator
This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn’t need to be cleaned until an appreciable drop in power occurs.
Simplified starting system
Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.
Start flap lever (M-Tronic)
With the M-Tronic, you do not have to worry about cold or warm start. With M-Tronic there is only one starting position on the start flap lever. The system detects cold or warm start automatically and electronically calculates the exact amount of fuel. You can start with fewer starting strokes and can apply full throttle immediately. If you press the throttle trigger the start rotary switch will automatically return to the operating position. (similar to illustration)
Manual fuel pump (Purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.
Winter setting slide control
It is quick and easy to switch the setting from winter to summer using the slide control. Using the winter setting will prevent the air filter and carburettor from freezing. (similar to illustration)
Locking plug-in bolt
Changing the tool is made particularly easy by locking the plug-in bolt in place. (similar to illustration)
Large fuel tank
The transparent fuel tank with a volume of 0.75 l ensures long working intervals with fewer fuel stops. The level is easily visible from the outside. Easy to refuel through a large, easily accessible tank opening. (similar to illustration)
Air filter with long service life
The easily accessible paper filter with a long service life means it can go for long intervals without changing. (similar to illustration)
Parts, Consumables + Accessories for this unit
Mowing Heads:
- Stihl AutoCut 46-2 Mowing Head
- Stihl PolyCut 48-2 Strimmer/Brushcutter Head
- Stihl DuroCut 40-4 Mowing Head
- Stihl SuperCut 40-2 Mowing Head
- Stihl TrimCut C 42-2 Mowing Head
- Stihl Guard for Line Mowing Heads + Polycut 4147-710-8112
For using Metal Bladed Cutting Tools (Guard & Fittings):
- Stihl Guard for Metal Bladed Cutting Tools 4147-710-8115
- Stihl Brushcutter Blade Collar Nut M12 x 1.5 Left Hand Thread (fits FS 360-FS 491) 4119-642-7600
- Stihl Thrust Washer (fits FS 360-FS 491) 4128-713-1600
- Stihl Rider Plate (fits FS 360-FS 491) 4119-713-3100
GrassCut Grass-Cutting Blades:
- Stihl GrassCut 230-4 Grass Cutting Blade 230mm 4t 4000-713-3801
- Stihl GrassCut 255-8 Grass Cutting Blade 255mm 8t 4000-713-3802
- Stihl GrassCut 260-2 Grass Cutting Blade 260mm 2t 4001-713-3812
- Stihl GrassCut 250-40 Grass Cutting Blade 250mm 40t 4001-713-3806
BrushCut Brush Knife Blades:
- Stihl BrushCut 300-3 Brush Knife Blade 300mm 3t 4119-713-4100
- Stihl BrushCut 305-2 Brush Knife Blade 305mm 2t 4000-713-4103
For Circular Saw (Approved for use with ‘Stop’ Guard & Double Harness):
- Stihl Guard for Circular Saw Blades [225mm Max Cut] 4148-710-8202
- Stihl Guard for Circular Saw Blades [250mm Max Cut] 4148-710-8203
- Stihl Advance Universal Harness
WoodCut Circular Saw Blades:
- Stihl WoodCut 200-44 Circular Saw Blade (Scratcher Tooth) 200mm 44t 4000-713-4200
- Stihl WoodCut 225-48 Circular Saw Blade (Scratcher Tooth) 225mm 48t 4000-713-4205
- Stihl WoodCut 200-22 Circular Saw Blade (Chisel Tooth) 200mm 22t 4119-713-4200
- Stihl WoodCut 225-24 Circular Saw Blade (Chisel Tooth) 225mm 24t 4110-713-4204
- Stihl WoodCut 250-26 Circular Saw Blade (Chisel Tooth) 250mm 26t 4000-713-4204
- Stihl WoodCut 225-36 Circular Saw Blade (Carbide Tipped) 225mm 36t 4000-713-4211
For Shredding:
- Stihl Shredder Starter Pack Ø 270mm (fits FS 360-FS 491) 4147-007-1011
- Stihl Guard For Shredding Ø 270mm 4147-710-8116
- Stihl ShredCut 270-2 Shredder Blade 270mm 2t 4000-713-3903
Service Kit:
Engine Oil (Good, Better, Best):
- Stihl HP 2-Stroke Engine Oil: 100ml, 1 Litre, 5 Litres
- Stihl HP Super 2-Stroke Engine Oil: 100ml, 1 Litre, 5 Litres
- Stihl HP Ultra 2-Stroke Engine Oil: 100ml, 1 Litre, 5 Litres
Accessories:
- Stihl 2-Stroke Fuel Mixing Bottle
- Stihl Combi Can: Orange, Transparent
Cleaning + Care:
- Stihl FS Care & Clean Kit Plus
- Stihl VarioClean Special Cleaner 500ml
- Stihl Superclean Resin Solvent 50ml, 300ml
- Stihl Multispray 400ml
PPE (Stihl Function range for occasional/home use):
Brand | |
---|---|
Power Type | Petrol |
1 review for Stihl FS 461 C-EM Petrol Clearing Saw (45.6cc)
You may also like
£24.00 (inc VAT)
Usually dispatches within 7 to 10 working days.
£40.00 (inc VAT)
Usually dispatches within 7 to 10 working days.
£18.00 (inc VAT)
Usually dispatches within 7 to 10 working days.
£6.89 (inc VAT)
Usually dispatches within 7 to 10 working days.
£40.80 (inc VAT)
Usually dispatches within 7 to 10 working days.
£55.00 (inc VAT)
Usually dispatches within 7 to 10 working days.
Simon Montague –
First time shopping with R & T, I have just purchased The Stihl FS461C, came with a damaged engine casing, which could well have been down to the courier, just one of those things, I phoned R & T to tell them, I could not fault anyone at R&T, they said use it, and we will get replacement parts sent out, with absolutely no question, I cannot rate them highly enough, will definitely be using them again, And as for the strimmer, i’ve used the previous model for years, and this latest model is the same high quality. highly recommended